Description

Mitsubishi elevator door photocell MBS-S100

 

 

Specifications

Mitsubishi original light curtain
Mitsubishi elevator MBS-S100
safety contact plate light curtain two in one
S100-T light curtain

Protection distance	0-3500mm
working environment	-20℃-65℃，50,000LUX
dislocation	Vertical: ± 20mm (5°), horizontal: ± 10mm (7°)
Response time	≤70ms
Power consumption	＜3w
Signal output	1NO/1NC AC220V 5A或 DC24V 5A
Infrared tube logarithm	32
Receiver unit green LED	Power indicator
Red LED of receiving unit	Obscured or malfunction
	normal status
Operating Voltage	AC220V± 15%

 

 

● S100-C is placed on the top of the car as close as possible to the appropriate position of the car phase door, be fixed with screws
● S100-C is connected to the terminal of the control power supply, pay attention to the power supply voltages difference
● S100-T and S100-R are installed on the back edge of the car door panel, parallel to the door panel, the two should be on the same horizontal plane;
● The plug with super soft cable at the top of S100-T and S100-R is inserted into the power S100-C . The two plugs can be inserted into each other without distinguishing between transmission and reception;
● The two super soft cables of the S100-T and S100-R swing with the movement of the door, So during the installation, the natural bending transition radius of the cable should be ≥100mm, and it should not be clamped by mechanical parts and caused to be cut or squeezed;
● The relay in the S100-C has one normally open and one normally closed contact.